PREGAN NT9 SCREEN PRINTING DEGREASER 5 Litre

PREGAN NT9 Screen Printing Degreaser 5 Litre is a highly efficient, ready-to-use cleaner designed for the cleaning and degreasing of all types of screen printing mesh before stencil preparation and emulsion coating.

Thorough degreasing helps remove oils, grease and other contamination from the mesh, creating a clean surface ready for direct emulsion. This helps to reduce the risk of pinholes and surface deterioration during emulsion coating, contributing to more consistent stencil preparation.

The slightly viscous consistency allows the product to distribute effectively across the mesh while supporting economical application, including on coarser mesh grades. PREGAN NT9 is formulated primarily using components derived from renewable raw materials or produced biotechnologically.

The formulation is pH-neutral, free from phosphates and chlorides, and readily biodegradable, making it a practical choice for regular screen preparation in schools, colleges, universities and professional screen printing studios.

Key Features

• Professional screen printing mesh degreaser
• 5 litre container
• Ready-to-use formulation
• Suitable for all types of screen mesh
• Removes grease and contamination before coating
• Helps prevent pinholes when applying direct emulsions
• Helps improve reliable emulsion coating
• Slightly viscous consistency for effective distribution
• Economical application, including on coarse meshes
• Based largely on renewable raw materials
• pH-neutral
• Phosphate-free
• Chloride-free
• Readily biodegradable

Directions for Use

Apply a small amount to the screen mesh and brush thoroughly over both sides until the resulting foam is evenly distributed. Rinse thoroughly with water until the water runs off without foam. Once dry, the screen is ready for emulsion coating.